This-Old-Jeep.com's Zazzle Marketplace


See more personalized gifts from Zazzle.

Sunday, March 27, 2011

Well I found a couple of hours to start a few things out in the barn. Managed to drive out the last of the bushings from the rear springs...now I just have to wait for warmer weather to paint!
Also started to clean up the rear axle with the grinder and a wire cup brush... found the 43/8= 5.38 gear ratio tag too and a few things that I cannot figure out.

Photobucket

Anyone know what the screw is threaded into the axletube on the far left? Just curious about the band too that is on the far right near the joining of the tube and the diff housing.

Photobucket

Photobucket

Photobucket

So, here I am clearing away clods of 50 year old grease and dirt and these bubbles appear. One is on the top right and the other is on the bottom left of the diff housing. They look like a bubble in a weld that the grinding uncovered. I don't think that they go through the housing. At least I don't think that I could have done it with over zealous grinding.
Lots more cleaning to go before I paint. My 5 year old was fascinated with watching the gears turn when I removed the cover. He thought that they were really "cool!"
In other news, the front springs are toast... after wasting time on them and deciding to just try and replace the hardware both sides of the main leaf eye holes splintered off as the original bushings had worn completely through and the shackles continued eating into the leaf... Luckily a friend of mine is giving me his old springs! Got a crazy expensive quote for re-arching... 135 bucks... apiece! may as well buy new springs at that rate!
I also finished painting the draw bar in that spell of nice 60 weather we had a few weeks back and I'm hoping for a rolling (driveable?) chassis by this fall... keep your fingers crossed!